The root OSC message for controlling the LFE system is /lfe.
For example:
/lfe/gain 0 - Sets the gain of the LFE system to 0 dB/lfe/mute 1 - Mutes the LFE system
General Parameters
| Parameter | Arguments | Scale | Unit | Comments | Settable |
|---|
| /name | string | -- | -- | -- | ✓ |
| /color | [decimal, decimal, decimal, decimal] | 0, 1 | -- | -- | ✓ |
| /lock | boolean | -- | -- | -- | ✓ |
| /trim | decimal | -80, 30 | dB | -- | ✓ |
| /gain | decimal | -60, 12 | dB | -- | ✓ |
| /gain/ramptime | decimal | 1, 60000 | ms | -- | ✓ |
| /mute | integer | 0, 2 | -- | 0 = unmuted, 1 = muted, 2 = muted by solo (read-only) | ✓ |
| /solo | boolean | -- | -- | -- | ✓ |
| /preOrPost | string | "post", "pre" | -- | -- | ✓ |
Other Parameters
Equalizer
Dynamics
| Parameter | Arguments | Scale | Unit | Comments | Settable |
|---|
| /dynamics/attack | decimal | 0.01, 3000 | ms | -- | ✓ |
| /dynamics/release | decimal | 0, 5000 | ms | -- | ✓ |
| /dynamics/lookahead | decimal | 0, 50 | ms | -- | ✓ |
| /dynamics/compressor/threshold | decimal | -120, 20 | dB | -- | ✓ |
| /dynamics/compressor/ratio | decimal | 1, 100 | -- | -- | ✓ |
| /dynamics/compressor/knee | decimal | 0, 30 | dB | -- | ✓ |
| /dynamics/expander/threshold | decimal | -120, 20 | dB | -- | ✓ |
| /dynamics/expander/ratio | decimal | 0.009, 10 | -- | -- | ✓ |
| /dynamics/makeup | decimal | -40, 40 | dB | -- | ✓ |
| /dynamics/link | string | "multi mono", "link all", "link to 1st" | -- | -- | ✓ |
| /dynamics/bypass | boolean | -- | -- | -- | ✓ |
| /dynamics/reduction | decimal | -- | dB | -- | ✗ |
Levels
Delay
| Parameter | Arguments | Scale | Unit | Comments | Settable |
|---|
| /delay | decimal | 0, 5000 | ms | -- | ✓ |
| /delay/bypass | boolean | -- | -- | -- | ✓ |
Cutoff
Routing
| Parameter | Arguments | Scale | Unit | Comments | Settable |
|---|
| /routing/output/{i}/master | array | -- | -- | Physical output(s) fed by output channel {i}. Send the full list each time; a message with no arguments clears the channel. | ✓ |
| /routing/output/empty | none | -- | -- | Clears the whole output routing. Also emitted by the processor when the output routing table is empty. | ✓ |